APPLICATION
FORM FOR A DATA
COMMUNICATION
FROM PACKET
SWITCHED
PUBLIC DATA N/W (INET)
MAHANAGAR
TELEPHONE NIGAM LIMITED
Application No:
----0279
Valid upto
:---------
Price: 50/-
(Note: Use one
application form for one connection)
1. GENERAL SECTION
2. Installation
address (all bills to be sent here) ---------------------------
-------------------------------------------------------------------------------
--------------------------------------------------Pin:[
] [ ] [ ] [ ] [ ] [ ]
3. Correspondence address
(if different from above) ---------------------------
-------------------------------------------------------------------------------
--------------------------------------------------Pin:[
] [ ] [ ] [ ] [ ] [ ]
4. Contact Numbers:
Tel -------------------Fax-----------------Telex-----------
5. Type of
connection [1] Corporate Networking [2] Public Data Base Access
[3] International
(one or more [4] Others (Specify in detail----------------
6. Type of
connection [1] X25 Leased [2] X28 Leased [3] X28 Dialup
7. Speed required [
][ ][ ][ ][ ] 8. Tel no for X28 dialup/X32------
9. Person to be
given Password ----------------------------------------------
10. Nominee amongst
legal heirs (in the event of death) ----------------------
11. Relationship
with the Nominee ---------------------------------------------
I/We agree to abide
by the provision of Indian Telegraph Act and rule made
thereunder and
other "Terms & Conditions" as may be prescribed by the
"Telegraph
Authority"
from time to time .
Place:--------------------------
Date
:--------------------------
(Signature of
individual or signatory in
case of firm or
organization with Stamp)
Specimen Signature
1.
2.
3.
II. TECHNICAL
CONFIGURATION SECTION
1. Connection Type
[] X25 Leased: []1200 []2400 []4800 []9600 []19200
[]64000
& Speed [] X28
Leased: [] 300 [] 600 []1200 [] 2400 []4800 []
9600 [] X28 Dial
up: [] 1200 [] 2400 [] 9600
2. For X25 Leased
a. Type & make
or X25 Interface ------------------------------------------
(Indicate model
Terminal Computer & PAD/X25 card)
b. If X32 desired
as back-up, Telephone Number of access -----------------
c. X25 Profiles
(Tick One) [S] Standardized [C] Customized
(If Customized,
fill in X25 Profiles section IV- I enclosed)
d. Number of
Logical Channels (3 nos by Default from 16 to 18- All extra
are chargeable)
i. Incoming [ ][ ]
From: [ ][ ] To: [ ][ ]
ii. Outgoing [ ][ ]
From: [ ][ ] To: [ ][ ]
iii. Bothway [ ][
](03 by Default) From: [ ][ ] To: [ ][ ](16-18 by
Default)
e. Permanent
Virtual Circuit- Remote Address (Chargeable)
1.
---------------------------------------------------------------
2.
---------------------------------------------------------------
3.
---------------------------------------------------------------
4.
---------------------------------------------------------------
3. For X28
Leased-Default Profile [ ][ ] (1/2/3/10/11/12/90/91) (Refer X28
PAD Profiles IV-2)
4. For X28 Dialup-
Modem details
a. Max Speed [ ][
][ ][ ][ ] b.Ownership [] Self [] Departmental
c. It Self Owned,
indicate Type & Make
d. Details of
Modem, if any, already working
5. Facilities
required for X25 and X28 (All are chargeable Refer Tarrif Card.
Tick if required)
a. Reverse charging
[] Incoming (Acceptance)
b. Fast Select []
Incoming (Acceptance)
c. Closed User
Group (New CUG/Addition to existing CUG)
i. [ ] Creation of
a new CUG (List Network addresses of other members of CUG)
ii. [ ] Addition to
the existing CUG (List Network addresses of the Master CUG)
(Please indicate
which one is to be treated as default CUG)
CUG no Network
Address
1. [ ][ ][ ]
2. [ ][ ][
]---------------------------------------------------------------
3. [ ][ ][
]---------------------------------------------------------------
4. [ ][ ][
]---------------------------------------------------------------
III. PROFILES
Change of Profile is chargeable- Refer Tarrifs for Inet
1. X25 PROFILES
(Section 2c of Technical Configuration Section)
(To be filled in
only if "Customized" Profile is required)
0279
1.1 Level 2
Interface Parameters (Frame Level)
DEFAULT
SUBSCRIBERS'
(Standard)
(Customized)
1.1.1 Link
Procedure LAPB DCE LAPB DCE
1.1.2 Link Layer
Sequence Numbering Modulus 8 Modulus (8/128)
(Modulus 128 is
provided for subscriber with Satellite Access Path only)
1.1.3 Maximum Retry
Counter (N2) 10 (1-99)
1.1.4 Frame Window
Size (K) 2 (1-7)
1.1.5 Retransmit
Timer (T1) 3 sec (1-25)
1.1.6 Acknowledge
Delay Timer (T2) 200 msec (0 - 25000)
1.1.7 Idle Prob
Timer (T3) Off Off
1.1.8 Maximum Frame
Size (N 1) 273
1.2. Level 3
Interface Parameters (Packet Level)
1.2.1 Packet level
Protocol X25 (1984) X25 (1984)
1.2.2 Logical
Channel Allocation Order, Descending Descending
1.2.3 Default
Packet Length128 Octets Octels (32-1024)
1.2.4 Default
Window Size 2 (1-7)
1.2.5 Default
Throughput Class 9600 (< Speed)
1.2.6 Call Request
Timer (T11) 120 sec (1- 120)
2. X28 PAD PROFILES
(section 3 of Technical Configuration Section )
(Default Profile is
I unless otherwise indicated in the application form)
<-----------------------------
parameters -------------------------->
Profile 1 2 3 4 5 6
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
V
1 1 126 0 2 5 2 0 0
0 x 1 0 0 0 8 24 1 1 0 0 0
2 0 0 0 20 0 0 2 0
0 0 x 0 0 0 0 8 24 2 1 0 0 0
3 1 1 2 0 2 5 2 0 0
0 x 1 5 0 1 8 24 2 2 64 3 0
10 0 0 0 5 2 5 2 0
0 0 x 0 0 0 0 8 24 1 2 0 0 0
11 1 1 2 0 2 5 2 0
0 0 x 1 5 0 1 8 24 2 1 0 3 0
12 0 0 0 5 0 0 2 0
0 0 x 0 0 0 0 8 24 1 1 0 0 0
13 1 1 2 0 2 5 2 0
0 0 x 0 0 0 0 8 24 2 1 0 0 0
14 1 0 0 5 2 5 2 0
0 0 x 0 0 0 0 8 24 18 2 0 0 0
15 1 0 1 26 0 2 5 2
0 0 0 x 1 0 0 0 8 24 1 1 0 0 0
90 1 1 1 26 0 2 1 2
0 0 0 x 1 0 0 0 127 24 18 1 0 0 0
91 0 0 0 20 0 0 2 0
0 0 x 0 0 0 0 127 24 18 1 0 0 0
-------------------------------------------------------------------------------
ACKNOWLEDGEMENT
Received
application from------------------------------------------------------
for Inet connection
at----------------------------------------------------------
----------------------------------------------------------
Registration No
------------------------------------
(Signature)